- Joined
- Mar 12, 2024
- Threads
- 10
- Messages
- 41
- Reaction score
- 15
- Location
- Columbia, SC
- Vehicles
- Cybertruck FS AWD
- Thread starter
- #1
-
đź‘‹ Welcome! If you were registered on Cybertruckownersclub.com as of October 14, 2024 or earlier, you can simply login here with the same username and password as on Cybertruckownersclub.
If you wish, you can remove your account here.
DIY Pre-Cut Clear 8.5M PPF
- Thread starter CybertruckWraps
- Start date
- Watchers 1
- First Name
- Tom
- Joined
- Mar 31, 2024
- Threads
- 16
- Messages
- 410
- Reaction score
- 171
- Location
- Texas
- Website
- makerspacedude.etsy.com
- Vehicles
- Cybertruck
Is your PPf cut to fold over edges or stops at the panel edges?
OP
OP
- Joined
- Mar 12, 2024
- Threads
- 10
- Messages
- 41
- Reaction score
- 15
- Location
- Columbia, SC
- Vehicles
- Cybertruck FS AWD
- Thread starter
- #3
Yes! Wrap over the edge!
Ballsamic VINegar
Member
Do you need to use a heat gun to install this?
OP
OP
- Joined
- Mar 12, 2024
- Threads
- 10
- Messages
- 41
- Reaction score
- 15
- Location
- Columbia, SC
- Vehicles
- Cybertruck FS AWD
- Thread starter
- #5
Use a garment steamer! Stay away from heat gun!
whitewidow252
Member
- First Name
- Josh
- Joined
- Feb 1, 2024
- Threads
- 2
- Messages
- 13
- Reaction score
- 1
- Location
- South Carolina
- Vehicles
- Cybertruck AWD FS
Air speed film
8 year guarantee from uv yellowing and penetration from road debris & environmental contamination. We do not guarantee your DIY installation skills tho
but usually any film peel ups are easily fixed with steam gun and cleaning under the peel up.
8 year guarantee from uv yellowing and penetration from road debris & environmental contamination. We do not guarantee your DIY installation skills tho
but usually any film peel ups are easily fixed with steam gun and cleaning under the peel up.Similar threads
