Cybertruck Indoor Cover & Outoor Cover -- by Premium-CarCover

[Premium-CarCover]

Hello everyone I am the manufacturer of this cover.

Some of you have bought it from my website.

If you have any questions please feel free to contact me

https://www.premium-carcover.com

Regards

View attachment 39639


Here is an owner's review:

https://www.cybertruckownersclub.com/forum/threads/cybertruck-vehicle-car-cover-indoor-garage.13086/

 

[TL4]

Looks great ?

 

[Amuma]

I like it, do you make an outdoor version?

 

[D-Stew]

Am too interested in an outdoor rated version.

 

[CT425]

Ditto. Need an outdoor version.

 

[Premium-CarCover]

I like it, do you make an outdoor version?

Yes, but only in Gray without Logo.

 

[rizvend]

Hello everyone I am the manufacturer of this cover.

Some of you have bought it from my website.

If you have any questions please feel free to contact me

https://www.premium-carcover.com

Regards

View attachment 39639


Here is an owner's review:

https://www.cybertruckownersclub.com/forum/threads/cybertruck-vehicle-car-cover-indoor-garage.13086/

Are you planning for a version that doesn't obscure the camera ports? ?

 

[84Apollo3]

Can I buy it for the original amount listed on the post? I have been on the fence but have felt it is just hard to justify for the price.

 

[CybertruckRN1127]

I bought a generic cover and while it is larger than the Cybertruck it still poked some holes in the front and rear. The panels are Sharp and any slight pull one way or the other will rip the cover. Hopefully yours are rip proof.

 

[CyberGus]

Note that you should not charge when the forward air inlet is covered. Of course, the cover occludes the charge port as well, but proper ventilation is required for charging.

 

[Travis64]

Where is the outdoor cover link?

 

[Amuma]

Note that you should not charge when the forward air inlet is covered. Of course, the cover occludes the charge port as well, but proper ventilation is required for charging.

You do not have to cover the inlets but good point on the charge port. A slit would be nice but I made one with my knife lol

 

[HTownQ]

I have one of these for my CT. I use it outdoors. Took some camping rope with S clips to secure it from the wind. If it had a few reinforced tie down holes would be great. I ordered snap on grommets to try for now.