Search results

It wouldn't be on the same plane as the tonneau cover area. It's going to be like this. Those that have power coming in from the top can remove it. For those that have power coming in from the bottom, it can stay + it will help with WIFI signal strength

Absolutely! Actually for my first prototype I had no cutouts on the top, because I had envisioned the power cable feeding in through the bottom of the wall connector, where I already had a cutout for the charging cable. There might be users out there with a top side entry for the power cable, in...

I just received my brand new UWC. This thing is impressive. It is much thicker compared to the gen3 Wall Connector. I've already started designing a version for the UWC. The good thing is the faceplate and the waterproof covers are the same. Besides being deeper, it will also have a relocated...

Yes. It is a stainless steel sheet and does not require irreversible modifications to the the Wall connector. The original IP rating of the wall connector is retained.

Check out my new website. For now it links you to the Kickstarter campaign for the Cybercover, but in the future, it will show more accessories that I plan to design and make. https://openvolt.xyz/

WIFI is needed to configure or update the charger. A weaker WIFI signal does not mean you cannot access it at all, it's just a weaker signal. If you do want a stronger signal for a short period of time, like a software update, the cover can be removed without any tools, and placed back after the...

Check out my later posts about WIFI strength. I am also making a version for the Universal Wall Connector.

WIFI signal strength is affected. After some tests, I noticed the WIFI strength was between 68-70% with the stainless steel cover vs 96-98% with the original glass faceplate. It's worth noting that connecting to the Wall Connector via WIFI, at least in my experience, was only needed during...

As per the Kickstarter procedure, once the campaign ends, I will reach out individually to collect shipping info, during this step I also plan to collect charger info. You will be able to tell me at this step if you have a gen 3 or Universal Wall Connector.

I just ran a test using the Tesla One app, which is used for commissioning the Wall connectors. Once you are linked to the Wall Connector via the app, you can see the WIFI signal strength. I took a reading with the original glass faceplate and another one with the stainless steel cover. With the...

I'm convinced there are enough people interested in a version for their UWC. Will be getting one so I can make changes to my design and offer both variations

This is awesome! Thank you for those measurements

I'm buying a UWC and checking compatibility. Stay tuned for an update

Thank you very much

Hi Eric, the UWC 's dimensions are as follows 13.6in H x 6.1in W x 5.9in D while the gen 3 Wall Connector which is what I designed the cover for is 13.6in H x 6.1in W x 4.3in D I don't have a UWC to check how it's put together. It seems like my stainless steel cover would slip around it just...

Thanks for checking it out. Are you referring to the Universal Wall connector? https://shop.tesla.com/product/wall-connector

Hi all, I’d like to introduce myself in this forum. My name is Edson and I designed a stainless steel cover for the Wall Connector. After posting a picture of my build on Facebook a lot of people asked me to make more, so I decided to put my project up on Kickstarter. It will help me manage and...